Hello friends, being architecture lovers and also architects, we decided to create a line of lamps inspired by wonderful modern buildings.

The lamps are of three different types:

1. They all have the same base but what changes is the lampshade, of three different types, with a staggered line pattern.

2. We have also created a full lampshade approximately 1mm thick which we recommend printing with transparent filament; it must be inserted inside the lamps to create a realistic glass effect.

You can find the assembly video on our Instagram page to understand how it is assembled, even if it is very intuitive. Follow us on the Shack3d_print Instagram page for more information.

We printed all the lamps with PLA filament on our Bambu Lab P1S, in the typical colors of modern buildings.

Everything prints very easily, with minimal supports. We advise you to print the base upside down to minimize the need for supports.

Hope you like it.

As always, we thank you for the support you give us. If you like our designs, follow us and support us on our social pages (Instagram, TikTok, and X) Shack3d_print.

We will be happy to see the results of your prints. Share the photos with us by tagging us on our social pages—don't be shy!

A thousand thanks.

3D PRINTING SETTINGS

Printed with Bambu Lab P1S

Filament: PLA

Temp. 220°C

Infill: 10%

Support: yes

Top/Bottom: 3

Layer height: 0.2

Nozzle: 0.4