Design Concept

This Creality LED upgrade is designed to enhance visibility and accuracy during the 3D printing process by illuminating the print bed. There are two versions: one with zip tie holes and one without.

Purpose

The purpose is to provide better lighting for monitoring prints in low-light environments, helping identify errors or adjust printing smoothly.

Assembly Instructions

A 3x8mm screw is needed to install. There is a screw in the back that is used to mount the lights. Make sure you zip tie the wire out of the way and leave it long enough for the printer to travel all the way up without stretching the wires.

These are the lights I used.

https://www.amazon.com/ZSLAIFU-Dimmable-Flexible-Backlighting-Lighting/dp/B0D9M7FYS3/ref=sr_1_29?crid=1N65INZGH96XE&dib=eyJ2IjoiMSJ9.TpDLIu56uGzgxBiSYKL7NNRteVAitW2UTJ61Hb8Q66buHmiGxHH0p2QSt0iwhXoGt-vPAgnolD_h57z517nuMwyG9ePdMGDo8_iuAGlIPYIxFM6-db1h9leEnB37mF8YORk3mii1-WJA8jphFrmJEnX4ymzrz-2gzUHvreVNbJhip1_r9Kh10CqPoXy_iTGwuHtuiX0OZ7nyJkWohIHIonBDZ62L7vFR565hTAjRWRnOxHiOYDU_waCe1y2mqgUhAFHiB4JX3TptLSElC5KbAogOfb5Q4swUVmOfwRJhXdY.TtU0IsePUluyeWRnYuTs6eO8wYfZEMR0P242b6cDFkI&dib_tag=se&keywords=cob%2Bled%2Bstrip&qid=1754435658&sprefix=cob%2Bled%2Bstrip%2B%2Caps%2C156&sr=8-29&th=1