1/9
Model Overview & Print Notes
This is a pulley bike lift. If you have a high, empty ceiling, you can store your bikes, tires, or panniers underneath it.
Durable plastic like PETG is required for printing.
For assembly you will need:
1. 608 bearings. I used printed ones. Got them from here: Creality Cloud -Print in place bearings From Jerryie https://www.crealitycloud.com/model-detail/6862602f97fb0b32d5f67e7a
2. M8 bolts, 50mm long (1 piece) and 60mm long (5 pieces), as well as nuts for them.
3. A rope up to 10 mm thick with sufficient strength. Rope length equals "ceiling height" x 5 + "distance between upper pulleys".
4. Rope wall mount. I'm using a regular wall screw, but I might add something more convenient to the project later.
I recommend checking whether the hooks will fit your specific bike.
I hope no one has any difficulties with assembly. If you do, please leave a comment.
This is a pulley bike lift. If you have a high, empty ceiling, you can store your bikes, tires, or panniers underneath it.
Durable plastic like PETG is required for printing.
For assembly you will need:
1. 608 bearings. I used printed ones. Got them from here: Creality Cloud -Print in place bearings From Jerryie https://www.crealitycloud.com/model-detail/6862602f97fb0b32d5f67e7a
2. M8 bolts, 50mm long (1 piece) and 60mm long (5 pieces), as well as nuts for them.
3. A rope up to 10 mm thick with sufficient strength. Rope length equals "ceiling height" x 5 x "distance between upper pulleys."
4. Rope wall mount. I'm using a regular wall screw, but I might add something more convenient to the project later.
I recommend checking whether the hooks will fit your specific bike.
I hope no one has any difficulties with assembly. If you do, please leave a comment.
💬CrealityCloud Community Comments(...)
★CrealityCloud Original Reviews