1/9
Model Overview & Print Notes
ℹ Tips for printing:
Filament: PLA
Supports: No!
Layer height: 0.16(0.15)mm or 0.2mm
Wall loops: 3
Infill: 15%
Seam position: back
Wall generator: -
Detect thin walls: -
Brim: No!
BuildPlate: Smooth (Textured Build Plates not recommended!) Use a build plate that you know has good adhesion!
Info‼: Do not scale the Octopus any smaller otherwise the connections will no longer work!
Info‼: If you apply too much force to the legs they may break because the connections are small!
Info‼: Please be careful when removing the Octopus from the print bed!
------------------------------------------------------
❌‼Disclaimer‼❌ These files are provided for personal, non-commercial use only! This model is not suitable for young children or pets! Please store this model safely in environments with young children and pets, as small parts may pose a choking hazard or cause injuries. Avoid applying strong force, as it may damage the model and create hazardous fragments. After 3D printing, keep the model in a secure location out of reach of children and pets. Follow these precautions for safe use.
------------------------------------------------------
Colors and filament I used (4 Color):
PLA Matte / Plum
PLA Matte / Pink
PLA Matte / Black
PLA Matte / White
Or decide for yourself which colors and how many you want to use!
ℹ I made 2 Versions one without painted dots and one with painted dots in the model!
ℹ This model is very filament wasteful please keep that in mind!
------------------------------------------------------
ℹ New multicolor version (3mf)! This model is no longer pre-painted in the slicer – you can now freely choose which color goes where directly in your slicer for a better look and easier handling!
(Quick tip: identical colors next to each other won’t work – always place different colors side by side to avoid potential issues.)
💬CrealityCloud Community Comments(...)
★CrealityCloud Original Reviews