1/9
Model Overview & Print Notes
This is an easy-to-use multi-purpose turntable. It is not too big (only 130mm across).
I would like to thank user9891535378 for the welding extra hand.
https://www.crealitycloud.com/model-detail/welding-extra-hand?source=53
And
43D PRINT for the files to make the vice attachment.
https://www.crealitycloud.com/model-detail/headphone-holder-no-support-no-screws?source=53
Once the outer and inner parts of the ball bearing are printed, print 10 of the balls at 0.8mm layer height with tree supports on.
The complete ball bearing will slide into the base. There are 4 screw holes in the base if you would like to screw it to a bench or workspace. The top plate will firmly slide into the centre of the bearing.
The vice can be printed at 0.2mm layer height but is smoother at 0.08mm.
All parts may need a light sanding with sandpaper for smoother operation.
I found this quite fun to make and it was my first real challenge doing CAD design.
💬CrealityCloud Community Comments(...)
★CrealityCloud Original Reviews