1/9
Model Overview & Print Notes
MODEL
The model is for a side mounted built plate holder that can be used with the K2 Plus D3P Riser LITE.
Click on link to find out more about the K2 Plus D3P Riser LITE
K2 Plus D3P Riser LITE
THIS WILL NOT WORK WITH THE FULL VERSION D3P RISERS.
FEATURES
Features:
* The build plate holder can hold up to 8 build plates.
* It can be mounted on the left or the right side of the printer (as referenced when looking at the printer). The print setting has plates for mounting on either the left or the right side.
* Pdf instructions are provided (you need to download them separately)
ASSEMBLY AND INSTRUCTIONS
A detailed instruction and assembly guide with steps and pictures is available for download. The instructions are for the full version of the D3P riser. The side holders are the only part that changes.
It is the last file in the “File” section – you may need to click expand all a few times to reach it.
3D PRINTING
PRINT SETTINGS
IMPORTANT: After verification with Creality it appears that there are some issues that need to be resolved with the mobile printing app. At present it seems these may affect slicing and printing of the model. After verification, it was suggested by the Creality Cloud team to use the desktop slicing and printing software. Thank you for your understanding.
IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing.
I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings.
3D PRINT SETTINGS
I use the following settings and materials to print this model:
Infill % : 15% (no need for more)
Nozzle diameter: 0.4 mm
Layer height: 0.2 mm standard
💬CrealityCloud Community Comments(...)
★CrealityCloud Original Reviews