From the forgotten depths of the factory emerges a creation that appears to be constructed from the remains of machines, secrets, and forbidden experiments. This articulated Prototype is not just a figure... it is a piece that seems to have been taken directly from an abandoned laboratory.

🏗️ Model Information:

For this print, I used two printers: the Creality K1C and the ******** Kobra 2 Pro.

The model is divided into 11 pieces to facilitate printing and painting.

The total size of the assembled and extended figure is

X362.07 Y208.36 Y129.36

🛠️ Print Settings:

Slicer used: ******** Slicer and Creality Print 7

Layer height: 0.2mm

Infill: 15%

Supports: Yes. Do not use supports for the legs and arms.

Printing time: 12 hours 16 min

Printer used: ******** Kobra 2 Pro and Creality K1C

Filament used: Kexcelled - PLA White

Filament consumption: 211.67g

🖌️ The model was printed with Kexcelled - White PLA Filament and hand-painted using acrylic paints and a brush.

(This model does not include 3mf; it is only for printing in a single color.)