Design Concept

This lithophane lamp features 4 photos that transform into a visually striking light show, revealing intricate details when illuminated.

Print in WHITE PLA and strictly follow the instructions provided in the print settings!

But

This lamp serves a dual purpose, decorative and sentimental, allowing personal memories to shine beautifully in any room.

The lamp rotates on itself, allowing you to choose the most visible photo, and the photos simply slide into the grooves!

Printing Recommendations

Use a high-resolution setting with white PLA to ensure sharp details. A light source inside the frame will enhance the lithophane effect. The lamp consists of 3 parts; you will need to print it in 3 runs (1 part per build plate)

Assembly Instructions

Insert the lithophane into the frame, place a light source inside to effectively illuminate the image, and snap the cover into place.

For your Lithophanes, go to https://tool.itslitho.com/CreateModel, upload your photo, make sure to set the min thickness to 0.8mm and max to 3mm, modify the size by enabling cropping, then choose width 100mm and height 150mm!!! This is very important, otherwise you won't be able to insert your photos into the lamp!!!

Print Settings:

⚙️ For the lamp:

Layer height 0.2

Supports = yes (4 interface layers)

Infill 15%

Color = Black

⚙️ Flat lithophane print settings:

🧱 1. Layer height (MOST IMPORTANT)

0.08 mm → ideal (max quality)

0.1 mm → OK if you want to save time

👉 The finer it is, the more detailed the grayscale nuances will be

🖨️ 2. Line width / nozzle

Nozzle standard: 0.4 mm

Line width: 0.4 mm (or 0.42 max)

🌡️ 3. Temperature (PLA recommended)

Nozzle: 195–205°C

Bed: 50–60°C

🐢 4. Print speed

20 to 30 mm/s max

Outer walls: 15–20 mm/s

🧱 6. Thicknesses (CRUCIAL for the image)

Total lithophane thickness:

Min: 0.8 mm

Max: 3 mm

Infill: 100% mandatory

🧼 9. Cooling

100% from the 2nd layer

🚫 10. Supports

No supports

🎯 11. Orientation (ULTRA IMPORTANT)

Image face up

Flattest surface on the bed

✔️ Use white PLA (VERY IMPORTANT)

🔥 Quick summary

Layer height: 0.08 mm

Speed: 25 mm/s

Walls: 100%

Infill: 100%

Temperature: 200 °C / 60 °C

Fan: 100%

Supports: Disabled

Required hardware:

1 LED strip + connection connector

1 power adapter with switch