1/5
Model Overview & Print Notes
This was my first attempt at using Hueforge, and I chose a picture of my dog Loki. I used Black, Brown, and White PLA for my colors.
Settings are as follows: (I just used the Creality Print Hueforge settings)
100% Infill
Layer Height 0.08mm
Base Layer 0.16mm
Swap Instructions (Color Changes)
Start with White
At layer #2 (0.24mm) Swap to Black
At layer #10 (0.88mm) Swap to Brown
At layer #15 (1.28mm) Swap to White
At layer #12 (0.84mm) Swap to Brown for the rest
💬CrealityCloud Community Comments(...)
★CrealityCloud Original Reviews