LED Lithophane Lantern Box

Please Note: This model is only the lantern box, you must design and print your own images (Details below).

The Lithophane Lantern Box is designed to illuminate personal moments imbued in lithophane panels, casting a warm and sentimental glow. It serves both as a decorative lamp and a personalized memento featuring photographs or designs of your choice in the lithophane. This box is designed so that the top section can be rotated freely around the light section, allowing for all images to be rotated without the wire for the light moving. 

The lantern is assembled by sliding the lithophane panels into the slots on the frame. Once the panels are in place, the rest of the lantern just slots in to place. This version is designed specifically for an LED light strip. I used this one: 

Lepro 5M LED Strip Light, Cool White 6000K, 1650LM 15W, Dimmable, Stick on

Lithophane Settings:

Use the following site:

Settings:

• Shape Settings:
  • Shape: Plane
  • Width: 118mm
  • Height: 118mm
  • Min Thick: 0.8mm
  • Max Thick: 3mm
• Frame Settings
  • Frame: Frame
  • Thickness: 4mm
  • Depth: 3.8mm
  • Angle: 45

All other settings can be tweaked to adjust the quality and brightness of the image.

BE SURE TO PRINT THE LITHOPHANE PANELS SLOW!