Play PlayBook'd Crosswords in Portuguese (Português).

Free, unofficial Portuguese letter tiles for PlayBook'd Crosswords, the foldable book-style word game by ForgeCore: 120 tiles with Portuguese letter frequencies and point values, colour bonus squares and a one-page rules sheet in Portuguese.

The Portuguese set

• 120 tiles: 117 letters + 3 blanks
• 24 different letter tiles
• Total letter value 204
• Accents do not count (Ã = A, É = E), but Ç is a separate tile.

You need the original model

This file contains only the tiles and the bonus squares. The board, covers, tile holders and spine are part of PlayBook'd Crosswords by ForgeCore:

Not affiliated with or endorsed by ForgeCore. English tiles come with the original model.

Other languages

All 38 languages in one model, with a print profile for each language:

Single-language models:

What is in the file

1. All Portuguese letter tiles, blanks included
2. 32 double letter squares (blue)
3. 16 triple letter squares (green)
4. 10 double word squares (orange) + 2 split squares for the fold, printed as 4 halves
5. 8 triple word squares (red)

Printing - key settings

A multi-colour printer is needed: the letters and the bonus legends are colour inlays in the first layers.

• Nozzle 0.4 mm, layer height 0.2 mm, first layer 0.2 mm. The letters are inlaid exactly 0.4 mm (the first two layers), so a thicker first layer would shift the colour boundary.
• Tiles are printed face down: the texture of your build plate becomes the texture of the tile face.
• Leave the per-object settings on the tiles as they are (Arachne walls, small minimum feature size); they keep the thin strokes of the letters.
• Elephant foot compensation stays low, around 0.075 mm - larger values eat into the letters.
• The raised purge volumes and the prime tower keep light faces clean after dark colours; don't remove them.
• 2 walls, 15% gyroid infill, no supports. One PLA type for every colour.
• Tiles are 15 x 15 x 4 mm, the same size as the original tiles.

Rules

The one-page PDF is in the Instruction Files (A4 and US Letter): keep it as one sheet, fold it, or cut it into 4 cards. All rules and letter pictures for 38 languages:

FAQ

Why are the covers and the spine not translated?

The board, covers, spine and tile holders are ForgeCore's design. Out of respect for the author's work and licence we don't change or re-share them. This pack only adds new parts built from scratch - tiles, bonus squares and rules.

Can I print it on a single-colour printer?

No. The letters and the bonus legends sit in the same first layers as the body, so a pause-and-swap colour change does not work.

My build plate is smaller than 260 x 260 mm.

Select your printer profile, arrange the tiles inside its printable area and leave room for the prime tower. Move tiles to an extra plate if needed.

Where do the letter counts and values come from?

From the tile sets published for this kind of word game in each language, collected from open sources.

I found a mistake.

The rules were prepared with AI assistance, so mistakes are possible. Leave a comment and the files will be updated (v1.1, v1.2 ...).

Can I sell prints?

No. The pack is CC BY-NC-SA 4.0: share and remix with credit, under the same licence, non-commercial only.

Made by Voxlo Studio. Version 1. License: CC BY-NC-SA 4.0.