Model Overview & Print Notes

VERSION 2 AVAILABLE ! https://cults3d.com/en/3d-model/art/wall-gears-v2 This is my wall original wall gears project, -I have included 2 sizes of stands(hubs) of the gears one will make the gear almost flush with the wall the other will make it stand about 10mm away from the wall, as well as a 10mm spacer for more height. -you can make it manual or powered, i have included a shaft to make it powered I used a gear mechanism pulled out of an older IDE CD-ROM drive to power mine. unfortunately it is unlikely you will be able to find the exact same mechanism I used, but I have included the shaft and gear box just encase. ## 3D Printing Settings -the gears must be printed in vase/spiralized mode with the default base thickness for curia which works out to around 1.45mm