🎯 Recommended Print Settings

For best results, print this design with a standard 0.4 mm nozzle and a 0.20 mm or 0.16 mm layer height—this is the sweet spot balancing speed and detail. Infill of 8% would work well, keeping it lightweight yet stable enough for everyday use.

However, because the moon features a highly detailed surface, using a 0.2 mm nozzle at a finer layer height will give you superior detail—though print time will significantly increase.

If you're planning to scale this design up, a 0.6 mm nozzle is ideal and will yield excellent results at larger sizes.

The model scales beautifully at any size!

Check out my other designs