CHANGE LOG

08-31-25

V1.1 UPDATE

• Added additional dovetail to lower cabinet to increase joint strength

  

• Added 0.5mm additional clearance to 140mm fan opening
• Added mounting tabs to table top cover for new score keeper

• Added a score keeper (see additional print profile)

  

07-15-25

• I created a version 2.0 of the light box to accommodate five 5mm LEDs instead of three.  I also integrated in a diffuser to help evenly light the table.  

• You can download the individual STLs from the drop down above as well as from the available print profile.

  

  

  

  

• I added UV LEDs and printed the puck with Bambu PLA glow yellow to transform this into blacklight laser hockey!

____________________________________________________________________________________________________________________________________

I hope you enjoy this fully functional, 12v fan powered, 1/6th scale retro arcade air hockey table.  This project took many hours to create and fine tune but the end result is a working air hockey table that plays and feels like the full size version!

Features:  

• Dovetail and snap together fitment - You shouldn't need glue but can use it if you want to permanently join components together
• Flexible fan options - you can use either 120mm or 140mm 12v PC case fans to power this
• Designed to accommodate LEDs to light up the table top with completely concealed wiring
• Puck returns just like the full size table
• Score keeper 

Fan Specs & Wiring:

This model can utilize standard 120mm or 140mm 12v PC Case fans.  If you decide to use 120mm fans I included a fan spacer that you can print to hold the fans in place while allowing room around them for wiring. 

Powering fans can most easily be accomplished with a simple power supply like this:

https://www.amazon.com/Controller-100-240vAC-Adjustable-Splitter-Multi-Functional/dp/B0BBSBV9CF

LEDs:

if you opt to install LEDs i would suggest buying standard 5mm LEDs already wired for 12v so that you can use a single power supply for the fans and lights.  I designed a pathway for easy and concealed wiring of the LEDs.    

These are the LEDs I used:

5mm 12v UV LEDs - 30pcs

https://a.co/d/cGDZ69z

Please see instructions for more details about wiring LEDs