A detailed 3D model of a seated French Bulldog wearing glasses, designed as a small desk figurine or decoration.

Model dimensions:
35.07 × 45.94 × 50 mm

Recommended print preset:
0.12 mm High Quality

Printing information:

• Estimated print time: 1 hour 20 minutes
• Total filament usage: 10.85 g / 3.58 m
• Model: 10.34 g / 3.41 m
• Supports: 0.51 g / 0.17 m

Supports are required under the glasses. With the included print settings, they should detach from the model very easily.

If support removal is difficult, it is recommended to use a different material for the support interface. For example, when printing the model in PLA, use PETG or another suitable support-interface filament. This significantly reduces adhesion between the model and supports, making them much easier to remove.