Mushroom Lamp – Glowing 3D Printed Design

Bring a touch of whimsy to your space with this 3D printed mushroom lamp. Designed to glow softly through the translucent gills and cap spots, the lamp creates a warm, magical effect when lit.

✨ Features

Glowing details: The mushroom cap spots and underside gills are printed in translucent filament, allowing light to shine through for a soft, natural glow.
Compatible with Bambu Lab LED Lamp Kit: Designed to fit the Bambu Lab LED Lamp Kit for a clean, easy lighting solution.
Optional light holder included: An optional flat platform is included for those not wishing to use the Bambu Lab LED Lamp Kit.
Assembly made simple: Requires 5 × BT3×10mm self-tapping screws (or similar).
Display-ready size: Fully assembled, the lamp stands 7.9 in (200 mm) tall and measures 8.6 in (220 mm) in diameter.

🛠️ Required Hardware

To complete your mushroom lamp, you'll need the following components:

Bambu Lab LED Lamp Kit 001 (optional)
5 × BT3×10mm Self-Tapping Screws

🖨 Printing Recommendations

Filament: Use translucent PLA (or similar) for the cap spots and gills to achieve the glowing effect. The stem and base can be printed in opaque filament.
AMS required for spots: The version with translucent spots requires an AMS.
Infill for translucency: For best light diffusion, print translucent parts with 0–10% infill and 2–3 perimeters. Lower infill gives a softer, more even glow.
Layer height: 0.2 mm recommended for a balance of detail and print time.
Supports: Supports required for mushroom cap.