3D FIGURES FOR SCALE MODELS

All the characters visible on the cover are included in the model. They are all in the same style and depict people of various ages and characteristics in different poses. Use them to make your diorama speak for itself!

P.s. I suggest gluing them with super glue (liquid super glue) as it hardens quickly and holds very well. Also, be careful when handling them because some parts are very thin and break easily, separating from the base. After printing, wait for the plate to cool down, then detach them from the base

Model Dimensions

• Character height not scaled: ~ 1.6 m – 1.9 m

• Thickness: Varies depending on the character

Printing Characteristics

The model was made with my A1 mini and is compatible with all higher-end printers 

• No supports needed

• Scale 1:100: 4g of material – 1:30 hours of printing

• Scale 1:50: 15g of material – 1:30 min printing

Recommended Print Settings

• Nozzle print: 0.2 mm scale 1:100; 0.4 mm scale 1:50

• Print plate: Bambu textured PEI (the standard one)

• Printing material: PLA Basic Bambulab (colors of your choice)

• Layer height: 0.1mm; 0.2mm

• Initial layer height: 0.2mm

• Wall generator: standard

• Initial layer speed: standard

• Outer wall speed: standard

• Inner wall speed: standard

Make sure the first layer is perfect and adheres to the bed. In case of adhesion problems to the print bed, make sure it is clean and eventually use a specific glue stick

Personal Note

I am using them to complete architectural dioramas for university and the professors are loving them, I hope you like them just as much!