3d Umbreon vmax Pokemon card. 

5 Colors required. 

Model is pre-painted. I do not reccomend scaling as this would effect the Hueforge and other model layer height modifiers. 

The Model is 143.75x200mm in size

#080a0d PLA Bambu Basic Black Transmission Distance: 0.3

#0056b8 PLA BambuLab Basic Cobalt Blue Transmission Distance: 1.2

#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2

#ffe17f PLA BambuLab Matte Lemon Yellow Transmission Distance: 4

#e2dedb PLA Jade White Transmission Distance: 5

This print uses 5 unique filaments

Swap Instructions:

Start with Black

At layer #10 (0.92mm) swap to Cobalt Blue

At layer #12 (1.08mm) swap to BambuLab Green

At layer #15 (1.32mm) swap to Lemon Yellow

At layer #22 (1.88mm) swap to White for the rest.

AMS required for multi color 3d model.