DOM//NO by ARCH//TECT

A premium haptic experience disguised as a classic desktop object.

The DOM//NO is not just a display piece; it is a precision-engineered kinetic slider designed for satisfying, repetitive tactile feedback. Featuring an internal curved track system, the two halves glide effortlessly against each other, snapping into place with a crisp, magnetic click.

Designed with the signature ARCH//TECT minimalist aesthetic, the exterior remains completely sleek, hiding the complex mechanical track within.

Key Features:

Hidden Mechanics: Seamless exterior profile with an internal guided track.

Haptic Feedback: Engineered for a sharp, satisfying snap.

Hardware-Lite Assembly: Designed for a clean press-fit assembly.

Print-Optimized: Designed to print flat with zero supports.

Hardware Required:

• Magnets: 2mm x 5mm or 1.75mm x 5mm
• Quantity: 10
• Assembly: press-fit or glue

⚠️ Safety Disclaimer: > Small magnets pose a serious, potentially fatal hazard if swallowed by small children or pets. While this model is designed for a tight press-fit, utilizing a drop of CA glue (super glue) in each slot is highly recommended to permanently secure the magnets if this toy will be around children.

Pro-Tip for the Perfect Glide: Depending on your filament and printer tolerances, the internal tracks may have slight layer lines. If the two halves are not sliding completely smoothly right off the build plate, applying a tiny drop of WD-40 or a silicone-based lubricant to the track will instantly create a frictionless, premium glide.

Note: Ensure your printer is well-calibrated for flow and dimensional accuracy to guarantee a perfect press-fit without splitting the layers.