First Hueforge print

3Mf should include all the setting that i changed in slicer

Feel free to give feedback as this is my first attempt

Other profiles for Hueforge appreciated

Thanks again

3D printing keeps the brain active

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Red
At layer #17 (1.44mm) swap to Gray
At layer #22 (1.84mm) swap to Jade White for the rest.