Description

I designed an airtight filament storage to store two spules of filament in an optimal way. The print only consumes 80g of filament.

The model fits perfectly inside an Ikea 365+ 10.6l box and uses simple hardware to go with it.

Requirements

• Ikea 365+ 10.6l with lid: https://www.ikea.com/de/de/p/ikea-365-vorratsbehaelter-mit-deckel-rechteckig-kunststoff-s79276760/
• Simple plastic tube with 16mm diameter OR just print the tubes (Print Plate 3)

Optional

• Hygrometer: https://www.amazon.de/dp/B07QH1MYPY?ref=ppx_yo2ov_dt_b_fed_asin_title
• Silica container (Print Plate 2)
• Silica gel: https://www.amazon.de/dp/B07H2FFKZ5?ref=ppx_yo2ov_dt_b_fed_asin_title

At first, the two parts have to be printed. In the meantime, you can already shorten the pipe with a diameter of 16mm to the appropriate size (15.5cm x 2). As soon as the parts are printed, you can assemble the filament storage as shown in the pictures. You need a bit of force to put the two pieces together, that is intentionally so the two parts have a strong connection and stay together.

I really like my design and everything worked out nicely. I hope you like it too, let me know, if I should change or add something!

Please be nice ;)