* * * NOT MY WORK * * *

Note: my photos are the ones in full black

README.txt → Voyager Satellite Desktop Model by noahlileger on Thingiverse: https://www.thingiverse.com/thing:2556130

LICENSE.txt → This thing was created by Thingiverse user noahlileger, and is licensed under Creative Commons - Attribution - Non-Commercial

Description by original creator (noahlileger) below:

Summary

Happy 40th Birthday Voyager!

Here's my desktop model of the satellite. I've carefully broken the design into pieces that can be easily FDM printed. I've intended this design to be printed at 100um layers with a 0.4mm nozzle.

Everything should press together easily, but some dabs of glue could be useful to secure things in place.

There are 14 unique parts. 16 part to print in total. At 100um the total print time is around 8 hours.

Enjoy!

Print Settings

• Printer brand:

  Tinkerine

• Printer:

  Ditto Pro

• Rafts:

  No

• Supports:

  No

• Resolution:

  100um

• Infill:

  30%

• Notes:

  I recommend using 100 micron resolution and above as there are some step angles on the antenna reflector. (60% is steepest angle)

  No support is required. Some features have minor bridging (<8mm)

  All fits should be loose press fit. Glue may help with assembly but should not be required.

License

CC BY-NC

Voyager Satellite Desktop Model
by noahlileger is licensed under the Creative Commons - Attribution - Non-Commercial license.