Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 200x112.5mm in size
 You may print at higher layer heights below the Min Depth of 0.48mm
 The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
     PLA PolyLite Black Transmission Distance: 0.3
     PLA BambuLab Basic Red Transmission Distance: 4
     PLA Sunlu Purple Transmission Distance: 6
     PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
     Start with Black
     At layer #8 (0.72mm) swap to Red
     At layer #14 (1.2mm) swap to Purple
     At layer #22 (1.84mm) swap to Jade White for the rest.