This is what happens when Benchy enters public domain during a mini robots design contest!

In the spirit of Benchy's original purpose as a benchmark test, this variant will also help you test out settings for printing my other jointed models.

Print the main body just like a normal Benchy, with whatever material and print settings you want to try out. Your slicer's default 0.2mm profile should be good for a start.

For the rest of the parts, I recommend ABS/ASA or PETG. (Go ahead and try PLA if you want - then wait a week and see how loose the joints get!) Print 6 each of the leg and foot parts, and 2 each of the sockets and cannons.

The sample model was printed using Prusament Galaxy Red PLA and Prusament Galaxy Black ASA.

This model is released under a Creative Commons Attribution 4.0 license, which allows commercial use with attribution. You can provide proper attribution by including the following statement:

All Terrain Assault Benchy © 2025 by Lucky 13 Toys is licensed under CC BY 4.0

This model is also based on the original 3D Benchy created by Daniel Norée for Creative Tools, in compliance with the CC0 1.0 public domain license.

Lastly, if this free model brings you joy (or profit), please consider supporting me with a small donation.