Please leave a like, it really helps!

A compact, ergonomic bed scraper designed for safely lifting prints from smooth build plates (PEI, glass, etc.). The wide wedge helps get under brims/rafts, while the loop handle gives a comfortable grip and good leverage. One-piece design prints fast and is easy to keep near the printer.

This scraper is meant to be tough, slightly flexible, and easy to print. The front edge is rounded to help reduce the chance of scratching or gouging smooth plates when used carefully.

Print recommendations

• Material: PETG recommended (tough + a bit of flex).

• PLA is OK for light use; ABS/ASA also works well.

• Layer height: 0.1 - 0.20 mm

• Perimeters: 4

• Top/Bottom layers: 5

• Infill: 10-20%

• Supports: No

Use & care

Work slowly around the print and lift gradually. Avoid prying aggressively in one spot, especially on textured PEI.

Print also the Calibration Cube