Check out my page to find all the available paintings and other frame variations (they will be added later). Click here to see the other models!

This model is a frame measuring 220x140 mm, with the possibility of installing an LED strip at any angle and in any configuration, which allows you to illuminate the image inside the frame in the way you need.

At the moment, the frame can be used for both 220x140 and 140x220 pictures thanks to the modular mounting (in the future, a wall mount is planned to be added).

The frame has two backlight options: one without a lightscreen (a white plate 0.6 mm thick) is used for paintings  where the base is any color other than white, and it serves as a diffuser; in all other cases, the bottom of the painting is white, and a lightscreen is not needed.

My assembly methods Led Strip:

• Usually, I use a 2‑meter 5V LED strip, cut it into 10 pieces, and solder them in parallel, which allows me to illuminate the entire area of the painting (this option is universal)

   

  

   

• However, you can use ribbons of both larger and smaller dimensions and bend them to fit key areas in the image (this will work for one specific picture).

How to assemble and use:

• Before printing, you need to decide which images you want to use with LightScreen or without it. This determines the choice of the middle part (it is indicated in 3mf).

• After printing, you should have the base (the back part), the top edge of the frame (the upper part), and the middle (the central part).

• Also, choose whether the frame should be in a vertical or horizontal position, and print the required margin.
  If you have chosen an image with LightScreen, print it as well.

• Don’t forget to secure the back panel using 4 M3 4 mm countersunk head screws. 

• After that, all that remains is to print the image and add the electronics (as described above in the section “My methods for assembling an LED strip”)

In the future, frames will be designed for other sizes and form factors.

All the picture files that are used and fit my frames were created by me, and if you’d like to see more exclusive pictures — or even NSFW or custom ones — you can subscribe to my Boosty and follow my work in this
area.

If you are interested in selling this model and paintings, then visit my boosty and look for the level of commercial use.

 ✨ I hope this project will brighten up your evenings) ✨