Hi,

I usually print benchies to test new challenging materials. However after a while they lay around in the house and don't fulfill any function. I wanted a to use my 7mm x 2mm magnets, so I made a fridge magnet.

I also wanted to label the material the Benchy was printed on, so that can be found in the bottom.

I used a single 7mm diameter x 2mm thickness Neodym magnet. Similar to the ones here: Neodym Scheibenmagnete Ø7x2 mm N45 1KG ► magnethandel.de

I intrducead a pause at about 19.6mm to insert the magnet.

A step file and an Autodesk Fusion native File (.f3d) are also available, to label more materials.

I would like to extend my gratitude to Daniel Norée and Stemfie3D