Project: goku base form.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x149.06mm in size and 170x253

You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #6 (0.56mm) swap to Blue Gray

At layer #13 (1.12mm) swap to Yellow

At layer #18 (1.52mm) swap to White for the rest.