Creality Sonic Pad top mount for Ender3 S1 or S1 Pro (it could fit other printers too, feel free to remix if needed). It still allows the screen to be tilted for you to have it properly in front of you.

Depending on your installation you can change the display orientation in the settings, I kept it default.

Instructions

There are two parts since they are not symmetrical for the screw holes. Therefore you need to print one Left and one Right.

Use the screws from the Sonic Pad feet and snap at the top of your printer.

Print flat, no support required.
Printed in 0.2mm.

Credits

This model was uploaded by csantos07 on Thingiverse, and his video: