This is NOT a remix of an amazing Jasoncanning case:
https://www.thingiverse.com/thing:2578431
since I did not use any original files just the picture as reference.

This is complete rework with slight changes.
The case is printed in place with integrated hinge (inserts printed separately).

Fit small glasses up to 160x40x25 mm.
Can add rescaled version upon request.

Print instructions

Designed to be printed with 0.2mm resolution and 3 perimeters.
The parts have very tight tolerance (0.2mm) so well tuned printer required!
Inserts don`t have to be glued just push in using some force with caution not to break them.

Need 2 8x3mm magnets.
(For example https://www.aliexpress.com/item/10000111771556.html?spm=a2g0o.productlist.0.0.55eb2a387DVjO9&algo_pvid=511d35b0-369e-4d06-a0e1-92d54ea40cca&algo_expid=511d35b0-369e-4d06-a0e1-92d54ea40cca-2&btsid=0b0a182b16037955129947964e01e7&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ )