Try out this hummingbird generated using HueForge software! Play around with different colors and swap heights to customize the look.

Instructions for Bambu Studio and PrusaSlicer layer swaps.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
   Polymaker Black Transmission Distance: 0.5
   Polymaker Blue Transmission Distance: 2
   Polymaker Yellow Transmission Distance: 8
   Polymaker White Transmission Distance: 6

Swap Instructions:
   Black until layer #9 at 0.8mms
   Blue until layer #12 at 1.04mms
   Yellow until layer #20 at 1.68mms
   White until layer #24 at 2mms

(Filament transmission distances approximated)

For additional help, check out the #filament-painting channel in the Polymaker Discord