The base isn't necessary when the door is kept in a closed position.

Dimensions:

• Height: 16.4cm
• Width: 8.73cm
• Depth: 1.465cm

Suggested print settings:

• Layer height 0.2mm.
• Infill 15%.
• Perimeters: 5 (for strength).
• Print-in-Place.
• No supports are required.

Slight effort is required when first loosening the hinge.

NOTE
Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.