Little and handy handle for screwdriver bits (0,65mm/0,25 inch).
Both 10mm and 25mm deep versions have a slot on the bottom for 5x3mm cylindrical magnet.

Bottom part designed for higher torque and an ability for the tool to stand vertically.

Best printed with 3 wall lines on 0,4mm nozzle.
1x 5x3mm cylindrical magnet recommended.

---
MAGNETS/MAGNESY [PL]:
Magnesy 5x3mm kupisz np tu: ALLEGRO
Kupując z mojego linku wspierasz moją twórczość. Dzięki!