This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment stripe within the base.

Print center will fit a 32x7mm Bullseye Spirit Level, held in with a bit of superglue.

Alignment stick hole is modeled at 6.5mm to fit a ¼ inch wooden dowel. You may need to sand your dowel or add a bit of tape to get it to fit well depending on dowel tolerances. I painted my dowel red with spray paint. I also included the full STEP and F360 files in case you want to modify the print to fit your alignment stick or other needs better.

I printed my stand in SUNLU PETG. 

Listing this for sale somewhere?

That’s great! Please respect the license by including a link directly to this page, as sharing without attribution is not permitted. If you are making money from this venture, please consider leaving a tip as a thank you for the time and effort I’ve spent making and testing the model, and for making it freely available for commercial use.

Edit 9/22: Added longer adjustment screw files