Model Overview & Print Notes

Craft sneaky strategies with these tricky tiles! They trap the first ball to enter each path, allowing you to outmaneuver foes in Hextraction, the hackable, 3D-printable board game. The Triple Trap Tile can trap up to two balls, one each in different directions. Be careful entering too fast... it can be a bit touchy. The Double Trap Tile only captures a single ball, but can be installed in four different orientations. It will occasionally trap too many balls, which are easy to knock loose! Double Trap source: https://a360.co/3H2dJBS Triple Trap source: https://a360.co/3MoaVC5 All of my Hextraction tiles have a built-in sacrificial support under each notch - remember to snap it off after printing. Enable the brim if these detach from the bed. Hextraction is a 3D-printable, modder-friendly board game designed by me, Zack Freedman of Voidstar Lab. In addition to tiles, you'll also need [10mm steel balls](https://amzn.to/3MqpN30) or [3/8" slingshot ammo](https://amzn.to/41Hs5PG) and [a game board](https://than.gs/m/856439). To learn the rules and how to get started, [watch the Hextraction video](https://youtu.be/Iqz7ZDdP25A)! Hextraction is absolutely free - it's free of charge - all of my models are here on Thangs, commercial use allowed. It's free-form - you can play with any number of opponents, even zero. It's free to modify - you can create your own tiles and configure your own board. For more information, visit https://playhextraction.com.