Model Overview & Print Notes

**Voron CAN-do it!** Switching your Voron 2.4 or Trident to CAN is an excellent way to lose the bulk and drag of cable chains. However it means you need to relocate your Y Endstop microswitch off of the X gantry. This design replaces the wire organizer on the right rear motor gantry. This mount holds a standard microswitch & PG7 wire gland for strain relief on you umbilical / can cable. Two versions are included a "Multi" version that has the Voron logo as separate bodies for multi-color printing. The other version has the Voron logo inset for single color prints. Also includes a "Bumper" to actuate the Y Endstop in its new location. The bumper replaces the Y axis cable chain mount. --------------------------------------------------------------- **Parts Needed (Affiliate Links):** - DF2-5L Microswitch (Voron BOM part): http://shrsl.com/422xl - M3x8 Screws: https://amzn.to/3AYdAMc - PG7 Cable Gland: https://amzn.to/43Kwfaj - Polymaker Filament: https://tinyurl.com/Polymakerr --------------------------------------------------------------- **Files Included:** - Y Endstop Relocation PG7 Mount STEP File - Y End Stop Bumper STL - Y Endstop Relocator STL - Multi-Color Y Endstop Relocator STL --------------------------------------------------------------- **Recommended Print Settings:** - 4 Perimeters - 20% Infill - No Supports Required - ABS or ASA Filament recommeneded. - "Multi" STLs require using "Split -> To Objects" in your slicer. Then you can color the individual bodies. --------------------------------------------------------------- Want to Support what I do? Check out my social medias please! **Link Tree:** http://www.MandicReally.com/links --------------------------------------------------------------- Design covered by GPL3 Open Source license. Any Remixes or Derivatives are required to adhere to license terms & use the same license. PLEASE Attrubute any Remixes of my designs: MandicReally