Model Overview & Print Notes
Summary
Star Wars light switch plate that I made for my sons bedroom. I used glow in the dark ABS for the upper layers so when he shuts off the lights you can see the death star and tie fighter with background stars.
I had to remove the right side of the stl in order to get it to fit my sons light switch because of the woodwork. We live in an old house and the woodwork around his door frame is almost 6 inches wide. I did not modify the model I have posted here, but if you look at the real pictures you will see that the right side is narrow compared to the model.
If you need to make any changes to get it to fit,
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/h9785qTWZPh
Print Settings
Rafts:
Doesn't Matter
<p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>2 mil</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20%</p></div></p> <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>I made this for my son's bedroom. </p><p>I printed this at 2 mil with supports (the bottom is hollow to accommodate the light switch) and 20% infill and between the 28th and 29th layer I paused my printer and swapped out the black filament for glow in the dark then resumed printing. you may need to play with your slicer to figure out just where to pause it, but it will look pretty cool when it's done.<br>Note that on my printer not all of the stars in the background printed and most that did fell off while I was removing the supports. Don't be surprised if yours does the same.</p><p>Enjoy!</p></div>
💬Thingiverse Community Comments(3)
★Thingiverse Original Reviews