A simple display case for the Raspberry Pi 2 & 3 Model B. I used a 3.5inch touchscreen LCD, which is purchased from ebay. Link and guide is listed below.

The micro SD card is accessible from outside. A special feature is, that it is held in place, even when the spring loaded mechanism of the sd slot fails (which happened here).

The raspi is entirely passive cooled. I have not used a heat sink or a fan.

Do not print assembly.stl. I have three different top parts. I only used and printed that width the display. I used some weak glue to bind the parts together.

In case you need some changes to the model to fit your Display, there is a customizer

If this is not enough for you, feel free to send me a message :)

User-specified models:
raspiBplusCase_top_differentCutout.stl
raspiBplusCase_top_extraTall.stl

display is from ebay

guide to bring it to life

(I used the raspbian image)