1/5
Model Overview & Print Notes
Summary
I was a bit surprised this item was hardly to find on Thingiverse, found one but still had is flaws and it didn't fit well.
Everyone knows the problem after you use just used a part of your, silicone, acrylic, adhesive or any other product, that after you store it, even for a short time, the product can't be used anymore. The caps provide with some brands are nice but they not work because the air is still getting in.
So I designed a screw cap that holds an O-Ring to seal the cartridge 100% air tight.
Size of the O-Ring is 25.0 outside D - 18.6 inside D. and a thickness of 3.2 mm
Please also press LIKE when you download or collect, thanks.
Happy Printing.
Print Settings
Printer Brand:
Prusa
<p class="detail-setting printer"><strong>Printer: </strong> <div><p>i3 MK3</p></div></p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div></p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div></p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2</p></div></p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>25</p></div></p> <strong>Filament:</strong> E-Sun PLA Up 2 U <br> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>0.2m layer height 60mm/srnrn(10/05/2019) Many questions about the orientation and if their should supports to be used.rnrnNO SUPPORT NEEDED.rnrnAlthough I printed it with the hole down, some people get better results with the hole up. The pics I posted are printed with hole down.rnrnAbout the material, you free to use any kind of filament, I used PLA just because it's easy to print and the cap doesn't get much stress. The ones I use are almost a year old and in perfect condition, But again you're free to use any filament.</p></div>
💬Thingiverse Community Comments(57)
★Thingiverse Original Reviews