Summary

No supports required. Just slice and print!!

4 Versions available:

Shark_v4_A.stl: Original design, movable jaw
Shark_v4_B.stl: Friendly face, movable jaw
Shark_v4_C.stl: Original design, NON-movable jaw
Shark_v4_D.stl: Friendly face, NON-movable jaw

Design updated to v4 for a tighter tail joint

The non-movable versions are intended for children, as teeth are quite sharp. Or just in case you have trouble printing the movable one.

Best results if you use a thin layer resolution (0.16 mm works perfect)

After printing, the tail and the jaw should get free with a little force:
https://youtu.be/14z1ll9yMmU

Then just enjoy it, even in the water!!
https://youtu.be/E1W-RyH8bGA
https://youtu.be/aV-XhMr7Edc

Check my other articulated designs HERE!
For Commercial License questions, check here

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 5</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.16 mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>0%</p></div></p>