Caution !!!
The files here are examples only. You can find full resolution files on cgtrader

I present my new version (ver. 2) of position rifle rest used for resting the rifle between shots (e.g. KPN10). The stand has a shelf for the H&M or JSB Premium pellet boxes (alternatively). The stand also has the option of attaching limiters to the rifle support. The unique connector of my idea used allows you to adjust the height of the stand in the range from 115cm to 170cm (shotters height up to 200cm). The connector securely connects two vertical pipes that slide together in a telescopic manner. The fastener securely locks the stand in the required height. The stand can be easily folded up to a height of 86 cm. If you are satisfied with the height of the stand less than 170 cm (necessary for a shooter with a height of 200 cm), you can shorten the stand tubes to a smaller dimension when folded.

To perform Rifle Rest you need:

1 x 25mm x 2mm x 900mm aluminum tube1 x 20mm x 1mm x 850mm aluminum tube3 x 15mm x 1.5mm x 330mm aluminum tube3 x 15mm x 2mm x 165mm aluminum flat bar1 x M5 x 60mm screw (allen type)2 x M5 x 40mm screw6 x M5 x 35mm screw3 x M5 x 25mm screw1 x M3 x 10mm screw2 x M5 wing nut9 x M5 clamping nut (with plastic)11 x washer fi 5

PET-G filament was used for printing - filling 65%. Layer height - 0.2mm Print speed - 60mm / s (for small elements I recommend 40mm / s)

Tevo Tarantula Pro