Battery holder in shape of beer crates, AA and AAA option

AA holds up to 12 batteries

AAA holds up to 20 batteries

-External dimension 59L x 55W x 52H
-Nozzle 0.4
-Resolution 0.28 ( it can be lower for better quality, but I did not find necessary)
-No supports needed
-Build plate adhesion: skit ( if your printer adhesion isn't good I would suggest print it with Raft on, due to the triangular holes in the bottom )
-Biggest bridge is 25 mm long
-Infill doesn't affect
-Shell : 3 walls

No post printing needed for the basic version, if you go with the stackable the bottom rim has to be super glued in place ( may have strings if your retractions isn't perfect set up but will work anyway)

Hope you enjoy it

• This project disappeared from Thingiverse and I had a backup *

The difference for the V2 version is the bottom "x" more resistant, making the bottom more resistant, don't forget that to make the pieces stackable you need to paste "beer_crate_stackable_rim.stl" at the bottom of the chosen model.

Thanks Todd Quatier! Gratitude!