A simple hook for keyring where the cat come out of the box when the tail is pulled.
Due to problems on the platform I had to create a new account to upload this model again.

Do not hesitate to make many cycles of opening and closing the box to break-in the mechanism.

MY PRINT SETTINGS:

• PLA
• Resolution : 0.28mm
• Infill : 20%
• Support : on Cover.stl and cat.stl

1) Clip the tail into the lever.

2) Clip the head into the cover.

3) Slide the cover at an angle into the box. Only one pin should be inserted.

Press the cover to insert the second pin