Lovely and quick Superman Hueforge Print.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

• PLA+ Overture Dark Blue Transmission Distance: 1.8
• PLA META Sunlu Teal Transmission Distance: 5.4
• PLA META Sunlu Red Transmission Distance: 4
• PLA Sunlu Beige Transmission Distance: 8.2
• PLA Default White Transmission Distance: 5

Swap Instructions:

• Start with Dark Blue
• At layer #12 (1.04mm) swap to Teal
• At layer #14 (1.2mm) swap to Red
• At layer #20 (1.68mm) swap to Beige
• At layer #23 (1.92mm) swap to White for the rest.