Make your own version free in your browser, any size or design: meshcast.app/cutter

100k+ makers follow us on Instagram for new free designs and casting tips: @meshcast.app

Four Christmas earring cutters for polymer clay: a tree, a bauble, a candy cane and a star stud.

About this design

Christmas earrings in four cutters: a three-tier tree (32 mm), a round bauble with its cap (28 mm) and a candy cane (32 mm), each punching its jump ring hole at the top, and an 18 mm star cut plain for a stud or the top piece over the tree. Good for Christmas earrings, holiday gifts and stocking fillers, Christmas markets and office parties. The pieces come out 26 x 32 mm (christmas tree), 25 x 28 mm (bauble), 20 x 32 mm (candy cane) and 18 x 17 mm (star).

Made with our free cookie and clay cutter generator, not modelled by hand: we drew each shape at its size and uploaded it to the tool, with Cut detail into cutter switched on for the jump ring hole. The zip holds exactly what the tool gives you, one STL per cutter (a 0.8 mm blade, 14 mm tall, with a 4 mm rim to press on, printed rim down with no supports) plus each drawing as an SVG, so you can remake any of them at another size. The christmas tree, bauble and candy cane cutters have a small tube inside that punches the jump ring hole in the same press, about 3.2 mm across; the 18 mm star is cut plain, for a post glued on the back or a hole where you want it.

For polymer clay earrings: condition Sculpey Premo or Souffle, Fimo or Cernit, roll it 2 to 3 mm thick, dust the blade with cornstarch (or cut through cling film for soft, rounded edges), press straight down and lift. Bake the pieces on a tile as your clay's packet says, for most brands 110 to 130 °C (230 to 275 °F) for 15 to 30 minutes per 6 mm, then sand the edges, varnish or add UV resin if you like, and fit jump rings, ear wires or glued posts.

The same cutters cut air-dry clay, precious metal clay, fondant and gum paste, and dough for tiny cookies, but once a cutter has touched polymer clay keep it for clay: print a second set for anything you eat.

Make the candy canes from a twisted rope of red and white clay rolled flat, and press tiny balls of coloured clay into the tree as ornaments before baking: they bond in the oven.

Shown as a 3D render of the four printed cutters and the polymer clay pieces they cut, not a photo.

Made with Meshcast

Meshcast is a free toolkit for makers that runs in your browser: turn any 3D model into a candle, soap, concrete or silicone mold, or make your own cookie cutters, texture rollers, stamps and keychains. Nothing to install, and you can try every tool without an account.

• Cookie Cutter Maker: meshcast.app/cutter
• Guide and print facts for this design: meshcast.app/3d-models/christmas-polymer-clay-earring-cutter-set
• 400+ ready-made molds and models: meshcast.app/3d-models
• Meshcast: https://meshcast.app/
• Instagram: @meshcast.app

How this was made

The model is parametric: it is generated by Meshcast's own code, not made by an AI. The pictures are rendered in Blender. We use AI to assist our work (ideas, writing and checking), so this design carries Thingiverse's AI label to be on the safe side.

Selling what you make?

Free for personal use under CC BY-NC. Selling what you cast or print from this design needs a Meshcast commercial licence (Pro or Founder): meshcast.app/licenses

Print settings

Estimated from the files, not sliced, on the same basis as our sliced cutters (PrusaSlicer 2.7.2): 0.4 mm nozzle, 0.2 mm layers, 3 perimeters, 15% infill, MK3-class speeds, for all four files one after another; on one plate they print faster. Rims flat on the bed, no supports. PLA or PETG.

What you need

• Polymer clay: Sculpey Premo or Souffle, Fimo, Cernit or any oven-bake brand
• An acrylic roller or a pasta machine, and a ceramic tile or baking paper to work on
• Cornstarch or cling film so the pieces release cleanly
• A pin or a paper clip to push the clay plug out of the hole punch
• Findings: 6 to 8 mm jump rings, ear wires or flat pad posts, and jewellery glue for posts
• Wet sandpaper (400 to 1000 grit) and a varnish or UV resin for the finish, if you like
• About 10 g of PLA or PETG for all four cutters

Steps

1. Print each file as exported: the rim flat on the bed, the blade pointing up, no supports.
2. Condition the clay until it is soft and roll it 2 to 3 mm thick on a tile or baking paper.
3. Dust the blade with cornstarch, or lay cling film over the clay for rounded edges.
4. Press the cutter straight down with a fingertip on the rim, wiggle it a little, and lift.
5. Push the clay plug out of the hole punch with a pin before the next cut.
6. Bake the pieces on the tile as your clay's packet says (most brands 110 to 130 °C, 15 to 30 minutes), never the cutter.
7. Let them cool, sand the edges, varnish if you like, and add jump rings and ear wires or glued posts.