Clear up your desk space with this 2-in-1 organizer, which combines 2 things:

1. cup holder

2. headphone hook

🆙 Upgrade to a larger 4-in-1 version of this model, which adds a phone holder and pen holder. Check it out here.

Quick facts

• Compatible table thickness: 1.5 to 5.0 cm (0.6 to 2.0 in)
• Size (not including screw): 14.5 x 10.0 x 11.5 cm (5.7 x 3.9 x 4.5 in)
• Parts: Cup Holder, Hook, Screw, Screw Pad
• Extra hardware: none
• Supports: none
• Material: any
• Walls: 3+ for strength
• Print time: about 6 hours
• Filament: about 130 g

3D Printing & Assembly Instructions

Optimized for FDM 3D printing, this model requires zero supports, ensuring clean tolerances straight off the build plate. Don't worry, I have oriented the parts the way they should be printed, so all you have to do is slice the model and hit print! Cup Holder should be printed upright, Screw Pad and Screw should be printed on its flat side, and Hook should be printed on its side.

Assembly:

1. Insert Screw through the screw hole from the bottom of Hook.
2. Attach Screw Pad onto the end of Screw (it should click together).
3. slide Cup Holder onto Hook by the 2 protruding notches.
4. Place assembly on the edge of a desk and tighten Screw.