Modular 1x stackable 3.5" HDD Rack optimized for airflow/ventilation

Stack as many drives on eachother as you want.
Structure doesn't rely on drives. Slots can be left unused.

Features

• Single rack height is 38mm, allowing better airflow
• Drives can easily be inserted or removed independently
• Slide the drive into slot and thighten 2 or 3 #6-32 screws per side (recommended length: 5/16 = 7.9mm)
• Drive ports easily rechable from front
• Screw the rack with screws to the back wall to prevent tipping over
• Foot with different heights available to raise rack in PC case

Assembly

• insert 4x threaded insterts M3*4.6*5.7mm
• Attach next rack with 4x screws M3*8mm
• Screw holes on back are 2.0mm, mark the drill holes on the back wall
• Attach screws through the back side to the wall, maximum head diameter 5.0mm
• Insert drives, secure with srews, attach connectors from front

Part List (per rack)

• 4x threaded insterts M3*4.6*5.7mm (print "TI4.0" = hole diameter 4.0mm for Threaded Insert; 4.2mm available)
• 4x screws M3*8mm
• 2x - 6x screws #6-32*5/16"
• 1x HDD_1xRack[...].stl

Print with PETG oder ABS/ASA. Drives get hot and need airflow.