Summary

This is a parametric OpenSCAD script to generate a fitting dice box for your dice.

The script generates one half of the box. To get a full box, you need to print two halves.
The script only works with standard regular polyhedral dice (except for the d10).

Parameter	Description	Default
dice_list	This is where you specify which dice should be included and what order.	d4, d6, d8, d10, d10, d12, d20
spacing	The spacing for the dice. [mm]	25
wall	Thickness of the wall. [mm]	3
thumb_hole_radius	Radius of the Capsule negative to make it easier to pick up your dice. [mm]	5
dice_oversize	Oversize factor for the negatives of the dice.	1.02
overhang_angle	Max angle of the bottom fillet of the box. [deg]	45
edge_length_d4	Edge length of the d4. [mm]	24
edge_length_d6	Edge length of the d6. [mm]	16
edge_length_d8	Edge length of the d8. [mm]	19
edge_length_d12	Edge length of the d12. [mm]	8
edge_length_d20	Edge length of the d20. [mm]	13
d10_height	Height of the d10 (tip to tip). [mm]	24
d10_across	Distance of opposite faces of the d10. [mm]	16
magnet_radius	The radius of your magnets. [mm]	3
magnet_height	The height of your magnets. [mm]	2
magnet_oversize	Oversize factor for the negatives of the magnets.	1.03