The 3D Printed Marble Machine #2 - Designed by Tulio Laanen
Video: https://www.youtube.com/watch?v=4uJugZ2lUi4

• Please consider making a donation if you want to support me and my work.
  Donate HERE: http://bit.ly/1GovCl0

• Check out; The 3D Printed Marble Machine #3 !
  http://www.thingiverse.com/thing:1385312

• Check out my first 3D Printed Marble Machine as well:
  Thingiverse: http://www.thingiverse.com/thing:615203
  Video: https://www.youtube.com/watch?v=0wrA-zyLiBg

• Contact mail: [email protected]
• My website: http://www.tuliolaanen.com

Made one yourself? Feel free to upload your photo’s!

Its very simple!

• I recommend slicing with with Cura: https://ultimaker.com/en/software/list

• Optimal settings:
  Layer height: 0.1 (0.2 optional for faster print)
  Shell thickness: 0.8
  Bottom/Top thickness: 0.6
  Fill Density: 25%
  Print speed: 40 mm/s
  No Support, brim or raft needed.

• use 9.5 - 10mm ball-bearings for Marbles

• And print!

(I Printed on Ultimaker 2)
.
.
Explanation different download files:

• R_The_3D_Marble_Machine_2_Final_Model.stl
  Original file. Works the best with given instructions above, which means slicing with Cura.

• repaird version:
  Fixed version, if your not using cura, or if you're experiencing problems while slicing.

• The four parts in separate STL files:
  Cap, Turning wheel, Lift, Track

• and there is a version of the lift (spiral) without the support cilinder around it if you prefer to print it with a brim or a raft